Firmware Update for SB2+


Step-by-step guide

  1. Go to the IP address of the booster (default is Take note of the software version
  2. Click user admin and login.  Default password is 'admin'
  3. Click Firmware Update
  4. Click the browse button and select the firmware update file.  
  5. Click Submit
  6. You will see a percent readout.  This is the percentage of the file that has been uploaded.  Once it reaches 100% there will be a pause of about 20 seconds.
  7. After the pause you will see status message.
  8. Wait until there is a message that notifies that the upgrade is complete and asks you to reboot the system
  9. Power cycle the system
  10. Go to the IP address of the booster.  The software version should have change.


Was this article helpful?
0 out of 0 found this helpful



Please sign in to leave a comment.